Aastra MX-ONE

<p>These instructions should assist in configuring your Aastra MX-ONE to 
work with TIM EnterprisePlus. If you are not familiar with PBX 
configuration, please contact your system maintainer.</p>

<table class="confluenceTable">
	<tbody>
		<tr>
			<th class="confluenceTh" width=158>Connection information</th>
			<th class="confluenceTh">Description</th>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Connection type</b></td>
			<td class="confluenceTd"><b>Serial Output: </b>
				The Aastra MX-ONE sends SMDR information via a serial connection which is located on Aastra MX-ONE unit itself. You will need to directly connect a serial cable from the Aastra MX-ONE to the PC that NetPBX 
				is installed and running on.
			</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Cable configuration</b></td>
			<td class="confluenceTd">Null-modem/Crossover.
			</td>
		</tr>
	</tbody>
</table>

<p>For your SMDR configuration, Aastra MX-ONE has multiple output formats. TIM EnterprisePlus requires the SMDR format to be set to <span class="reference">BC8</span> or <span class="reference">BC10</span>.</p>

<h2>Configuring TIM Enterprise<Plus</h2>

<p>Below you will find steps on how to configure TIM EnterprisePlus to listen for SMDR data from your Aastra MX-ONE BC10:</p>

<ol>
	<li>Browse to TIM EnterprisePlus as normal and login with your credentials.</li>
	<li>Click on the <span class="button no_margin">Directory</span> tab.</li>
	<li>Go<li>Click theon the pointsite inconfigured the Directory where you need to add during the PBXsetup Objectwizard and add a PBX with the name 'Aastra MX-ONE BC10'.</li>
	<li>Left-click on it and select <span class="button no_margin">Properties</span>.</li>
	<li>From the span>or create a new site and click <span class="button no_margin">General</span> settings tab select <span class="keyword">Aastra MX-ONE BC10</span> from the PBX model list>Properties</span>.</li>
	<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_enterpriseplus/pbx/aastra_mx_one_1.png" alt="Aastra MX-ONE BC10" />
	<li>In<li>Within the <span class="button no_margin">Connection<reference">Site Properties</span> tabwindow, select <span class="keyword">No>Aastra connection required<BP</span> from the <span class="reference">PBX model</span> drop-down list.</li>
	<li>From the <span class="reference">Connection method</span> drop-down list, select <span class="keyword">No connection required</span>.</li>
	<li>Finally, click on the <span class="button no_margin">Save</span> button.</li>
	<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/pbx/aastra_mx_one_2.png" alt="Aastra MX-ONE BC10" />
</ol>