...
| HTML |
|---|
<a id="Configure the CIL output"></a> |
Configuring your CIL output
When configuring your Siemens Realitis/Hipath DX to send its CIL information via a serial connection, you need to directly connect a serial cable from the phone system's wall box to the PC running netpbx .
...
| HTML |
|---|
<a id="Install NetPBX"></a> |
Installing NetPBX
To collect call logging data from the serial port of your phone system and send it to TIM Plus, you first need to install the NetPBX software. For setup instructions, click on the link below:
...
| HTML |
|---|
<a id="Configure TIM Plus"></a> |
Configuring TIM Plus
Once NetPBX is configured and collecting data, log in to TIM Plus and perform the steps below:
...