LG iPECS - Serial connection

...

SMDR Attributes (PGM 177)

Save Enable: Leave this is as the default which is unticked
Print Enable: This needs to be enabled by clicking on the check box
SMDR Record Call Type: This needs to be set to 'All Calls', you will need to select this from the drop-down list
Records In Detail: This needs to be enabled by clicking on the check box
Print Incoming Call: This needs to be enabled by clicking on the check box
Print Lost Call: This needs to be enabled by clicking on the check box
SMDR Dial Digit Hidden: Leave this as the default which is '0'
SMDR Currency Unit: Leave this as the default which is blank
SMDR Cost Per Metering Pulse: Leave this as the default which is blank
SMDR Fraction: Leave this as the default which is '0'
SMDR Start Time: Leave this as the default which is '0'
SMDR Hidden Digit: Leave this as the default which is 'Right'
Long Distance Call Digit Counter: Leave this as the default which is '0'
Long Distance Code (Max 2 Digits): Leave this as the default
MSN Print on SMDR: Leave this is the default which is unticked
Print Caller Number: This needs to be enabled by clicking on the check box

Here is an example of the a populated SMDR Attributes window screen:

Screenshotmacro
Border false URL /download/attachments/4817110/lg_ipecs_1.png

...

In the 

Referencemacro
Label Printer Port Selection (PGM 175)

window, set Info/On-line SMDR to Telnet Serial 1 to allow connections on TCP port 23.Here is an example of the Programming Port Selection windowsend call logging data by serial port.

ISDN Attributes (PGM 200)

To enable CLI information in the call records produced by your LG iPECS, you need to set the XXX to ON, as shown below:

Screenshotmacro
Border false URL /download/attachments/4817110/lg_ipecs_2.png

...